May 31 2009
Walleye Fishing Jig:Check Out These Great Casting & Retrieve Tips!
NEVER BEFORE REVEALED Walleye Fishing Secrets Click Here!
To use walleye fishing jigs you need to fine tune your concentration and develop a sensitive touch. When a walleye takes your jig you may feel a sharp rod tap or just feel a slow tightening of your line. An active walleye will inhale a walleye jig as they swim, then they will exhale the water back thru their gills. When a walleye inhales a jig you should feel a sharp tap,set the hook immediately! If you see the line tightening there is probably a walleye “mouthing” the jig. The walleye will put his mouth over the jig, and all you will see is the line start to go tight. This situation will happen when walleyes are not actively feeding. You will need total concentration to set the hook.
Newbe walleye fisherman go home empty handed many times because they fail to set the hook correctly. Manny beginners make the mistake of waiting for a sharp tap or strike on their walleye fishing jig like if they were fishing for other game fish with a crankbait.Key Walleye tip: Walleyes will hit your jig when it is sinking not on the upward and forward movement.
I have found when in doubt, or if anything seems different from the normal routine, set the hook! Key point: if the jig seems to sink abnormally after the hop, set the hook! a walleye has probably taken your walleye jig. If you think you have caught a weed on your retrieve and the drag is spilling line, set the hook! this could very well be a walleye. We all get those pesky little pecks on our jigs that we think are just pesky perch, but many times these little pecks are not perch but walleye! Set the hook don’t miss out on a trophy fish because you thought it was a perch.
Key walleye tip: You need to be able to feel even the smallest peck, or line movement so you need to keep your line taut when ever the jig is sinking. If you twitch your rod tip, then drop it back rapidly as the jig sinks, slack will form and you will not feel the strike. Instead , lower the jig with tension on the line, as if you were setting it gently on bottom.
You will detect more strikes if you carefully watch your line and rod tip. Many times, you will see a that you cannot feel. If you see your line twitch were it enters the water, or the line moves slightly to the side, set the hook.
Key Steps: How To Cast and Retrieve A walleye fishing jig
Step#1 LIFT the jig with a slight pop of the rod tip, then let the jig sink all the way to thebottom. How much of a “pop” will depend on how the fish are reacting the day you are fishing. If the fishing is real slow, and the fish are not moving much then try a very slow retrieve.
Step#2 Lower the rod tip, key point: this is when you will get your walleye strike or bite. Make sure you keep the line taut at all times when the jig is sinking. Go ahead and repeat lifting and lowering your rod tip. Try to develop a good pattern and make sure you reel your up a bit after you twitch the walleye jig.
Step#3 STRIKES Remember a walleye hit will come when the jig is floating back to the bottom, not when the jig is moving upwards or forwards. If you feel a sharp tap that means the wallye has sucked in the jig, set the hook immediately!If the fish aren’t active all you will see is your line tighten slightly, or the jig doesn’t descend to bottom naturally.
Step#4 SET THE HOOK immediately when you feel anything unusual, a walleye spits out a walleye fishing jig quickly. A Flick of the wrists result in a faster hook set then a long sweep of the arms, but you will need a stiff rod to sink the hook.
Mark Fleagle is an Expert Author At Ezinearticles.com. and has over 30 years of fishing experience who has written 100’s of useful fishing articles. Would you like to max out your catch on your next fishing trip? Blow your fishing buddies out of the water and get your bragging rights today! Also don’t forget to get your free copy of “78 Fishing Discoveries Unleashed” http://www.oldfishinghole.com
